Two-component, fast-curing hybrid epoxy-polyurethane vertical adhesive, composed of a polyurethane epoxy
resin reinforced with mineral fillers and catalysed by a mixture of amine hardeners. The different colouring of
the two components allows a visual check of the homogeneity of mixing.
FIELDS OF USE
Permanent bonding of building materials, concrete, marble, granite, natural stone, ceramic products, wood.
FEATURES
– Excellent adhesion
– Fast hardening
– Resistant to solvents, basic environments (therefore suitable for concrete) and acids
– Almost zero withdrawal
– Easily sandable
ATTENTION
– Avoid using at temperatures below 10 ° C
– does not adhere to silicones
– does not adhere to polyethylene
USE:
SURFACE PREPARATION. Thoroughly clean the surfaces, eliminating all traces of dust and crumbly parts, traces of
cement, plaster, greasy substance, etc. Better adhesion if the substrate is slightly roughened.
MIX PREPARATION. Carefully mix, using mechanical equipment, part A and part B exactly in the ratios indicated A: B =
100: 50 until complete homogenization
APPLICATION. Apply the mixed product on the clean and dry substrate with a spatula.
After 3 – 5 hours it is possible to move the product and after 12 hours (according to environmental conditions,
temperature, humidity, etc.) it is possible to proceed with subsequent processing.
IMPORTANT!
– Do not use compound A + B already in the gelation phase
– Do not put the unused product back in the jar
– Store at temperatures between 10 ° C and 30 ° C
– Hardening becomes faster at high temperatures and slower at low temperatures